by Bruce Stroyer | Sep 3, 2021 | Helical Case Study, Helical Piles, HELICAL SOE
This project in the Bronx, the IDEAL Design Team recommended a 12.75” x .500” W.T. helical pipe pile with a 22” x .75” helix as an alternate to drilling, dropping, and grouting, H-Piles. A total of 18 helical pipe piles were installed over 2 days. Each pile section...
by Bruce Stroyer | Apr 4, 2018 | Case Study, Helical Case Study, Helical Piles, HELICAL SOE, Screw Piles
OVERVIEW: The Spiegel Community Center is housed in a historic building in the village of Pittsford. The community center had outgrown the existing building and after several years of research and planning, it was decided that the existing historic...
by Bruce Stroyer | May 12, 2017 | Helical Case Study, Helical Piles, HELICAL SOE
OVERVIEW: If you didn’t see the previous case study we published about this project, The Leaning Tower of SOHO, then allow us to bring you up to speed. It may not have been as old or iconic as that other leaning tower over in Italy, but the 118-year-old...
